Table of Contents
Advertisement
Control/
interface
name
LAN port 1 (7)
RJ45 Ethernet
port
LAN port 2 (8)
RJ45 Ethernet
port
(9)
[empty]
Power On/Off
Pushbutton
(10)
Figure 7. Cisco FM1000 Gateway (rear panel)
Table 4. Controls and interfaces (rear panel)
Control/
interface
name
HDMI (1)
HDMI
connector
© 2021 Cisco and/or its affiliates. All rights reserved.
Control/
interface type
Use this port to connect a computer to the unit
for configuration and maintenance.
Note that the unit's twin Ethernet ports are
bridged together.
For instructions on how to configure the unit
using the Configurator interface, refer to
"Device configuration using the configurator
interface" (page
For instructions on how to configure the unit
using the FM Racer interface, refer to the
Fluidmesh Networks FM Racer user manual.
Use these ports to connect a computer to the
unit for configuration and maintenance.
Also see LAN (7) above.
Not used.
Press this button to power the unit ON and
OFF.
Control/
interface
type
If needed, use this port to connect an HDMI-
compatible video monitor to the unit.
Note that the Cisco FM1000 Gateway currently
features no video output capability.
Hardware installation
Function
36).
Function
Page 26 of 138
Advertisement
Table of Contents
