Reset To Factory Settings - TCS AVU940x0 Product Information

Reset to factory settings

If the IP address was changed manually, the web browser is no longer able to show the
site. If this is the case, enter the new IP address manually in the browser to get back to the
start page. You might also change the address area of your PC again.
If the set IP address or the administrator password is not known, the device can be reset
to factory settings.
 Switch off the power supply.
 Switch the DIP switches 3 and 4 at the mode switch to OFF.
 Switch on the power supply again.
The factory settings are loaded:
IP address:
sub net mask:
user:
password:
 After around 2 minutes, the front-door station is accessible again.
 Switch the DIP switches 3 and 4 to ON again.
TCS TürControlSysteme AG, www.tcsag.de
TCS Hotline • Mail: hotline@tcsag.de
192.168.1.250
255.255.0.0
admin
1234
14
Subject to technical changes
PI_AVU940x0-uk
11/2012