Configuration; Factory Settings; Configuration Options; Display Module Ami1010X - TCS AMI Series Product Information

Factory settings

Display module
communication time
door standby time
door release time
call time
master code
code lock function: code

Configuration options

Display module
 The display module is delivered pre-configured ex works with the keypad module
AMI10300 (corresponding to keypad new).
 When the jogwheel module AMI10400 was selected, the display module must be
!
configured anew with the software ADx configurator or PS/2 keypad (see any pro-
gramming manual Functional group with display module AMI1010x.)
 For setting and programming the display module you need exclusively a PS/2
keypad (not included in the delivery, see Accessory, page 18)!
 Using a PC keypad with USB connection or a USB adapter is not possible!
!
 For settings and programming see enclosed programming manual Functional
groupp with display module AMI1010x.
Can be adjusted resp. programmed with PS2 keypad:
 volume and microphone sensitivity
 add, change or delete a resident
 voice volume
 display contrast
 enter access codes
TCS TürControlSysteme AG, TCS Hotline Germany : hotline@tcsag.de
Fax: +49 (0) 41 94 / 9 88 129
12

Configuration

56 s
56 s
2 s
4 s
1234
all 0

Settings

05/2013
Subject to technical changes.
PI_AMI_FG-DISPLAY-uk 2A