User Settings; Settings System; Network Settings - TCS IVW9011-0261 Instruction Manual

USER SETTINGS

Make all system settings in the menu User settings.
1. Tap on Menu.
2. Select Settings and tap on User settings.
3. Press Home or Back, to exit the menu.

Settings System

Date
1. Tap on the symbol Date.
2. Change the date and confirm with Finish.
Ring tone volume
In factory setting, the ring tone volume is set at
level 5.
1. Move the slide control within the levels 1 to 8,
to change the ring tone volume. The current
ring tone sounds in the selected volume.
Standby mode
In factory setting the scrren is deactivated after
60 sec.
1. Move the slide control within the gradation 20
to 120 sec, to change the time setting.
Image buffer function
In case of a door call an image is stored auto-
matically. The image can be taken with an adjus-
table delay time. In factory setting the delay time
is set to 5 sec.
1. Tap on the symbol Image buffer function, to
de-/activate the function.
2. Move the slide control within the gradation
1 - 30 sec, to adjust the delay time.
Key tones
1. Tap on the symbol Key tones, to de-/activate
the key tones.
WiFi Netzwerk
Ethernet Netzwerk
Datum
Uhrzeit
Stand-by Modus
Ruftonlautstärke
Bildspeicherfunktion
AN
Tastentöne
AN
Home Page https://www.tcsag.de
Reboot Device
Reset Admin-Passwort
* * *
User settings

Network settings

The device is equipped with a LAN and WLAN in-
terface.
WiFi network
1. Tap the WiFi icon. You will be redirected to the
WiFi settings.
Ethernet network
1. Tap the Ethernet icon. You will be redirected
to the Ethernet settings.
Home Page
1. Enter the start page for the browser.
Reboot Device
1. Tap the icon to restart the device.
Reset Admin-Passwort
1. Tap the icon to reset the admin password to
the factory default.
System
Video
Ruftöne
Außenstation
Internruf
Wetter
3
Information
5
Aktualisieren Zurück
Benutzer-Einstellungen
19
EN