Model Name; Type Select; Model Copy; Model Reset - Fly Sky FS-i6 Instruction Manual

7.2 Model name

This function renames the currently selected model.
To change the name:
Use the "Up" and "Down" keys to select a letter or number, then press the ok key to confirm.
To save press and hold the "CANCEL" key.

7.3 Type select

This function changes the type of the currently selected model, including airplane and helicopter with
different types of swash plates.
To change the model type press the "UP" and "DOWN" keys to select the model type, then press and hold
the ok key to save and exit.
Swash Plate Type
0
Swash 140
0
Swash 120
0
Swash 90
Variable pitch
Fixed pitch

7.4 Model copy

This function copies the one model to another model slot.
To copy a model:
1. Use the "UP" and "DOWN" keys to select the model you want to copy.
2. Use the "OK" key to and use the "UP" and "DOWN" keys to select the slot to copy the model too.
3. Press and hold the "OK' key to confirm, the system will display a prompt asking "Are you su re", use
the "UP' or "DOWN" key to select yes and press "OK" again to confirm.

7.5 Model reset

This function resets the current model to the default settings.
Setup:
1. Use the "UP' annd "DOWN" keys to select a model. Press the "OK' key to confirm,.
2. The system will display a prompt asking "Are you su re", use the "UP' or "DOWN" key to select Yes and
press "OK" key again to confirm.

7.6 Trainer mode

Tra i ner mode is used to take control of a slave system when a switch is in the off position. This function
will only work when two systems are linked via the trainer lead.
Setup (This function must be assigned to a switch and will only be inactive when the switch is on)
1. Use the "UP" and "DOWN" keys turn the function on and off.
2. Use the "OK" key to and use the "UP" and "DOWN" keys to select a switch.
3. Press and hold the "CANCEL" key to save and exit.
Functions
Pitch Curve,Swash AFR,Gyroscope
Pitch Curve,Swash AFR,Gyroscope
Pitch Curve,Swash AFR,Gyroscope
Pitch Curve,Gyroscope
Gyroscope