Throttle Hold - Fly Sky FS-i6 Instruction Manual

5.
assignment.
3. To return a setting to default, press and hold the "OK" key
for 3 seconds. Press and hold the "CANCEL" key to save.

5.13 Throttle hold

This function is used with gas powered models in order to stop stalls when not in use.
Setup:
1. Use the "OK" key to change between settings.
2. Use the "UP" and "DOWN" keys to turn the function on or
off and increase and decrease the hold percentage.
3. To return a setting to default, press and hold the "OK" key
for 3 seconds. Press and hold the "CANCEL" key to save.
Note This function must be assigned to a switch in the Switches assign funciton.
Norma 1
Thro. hold SwD
Off
= Throttle
hold—
*Hold Off
Value sox
Not engaged