Elevon; Tail; Switches Assign - Fly Sky FS-i6 Instruction Manual

Digital

5.10 Elevon

The elevon function is used for planes that combine the elerons an alerons together.
Setup:
1.
Use the "UP" and "DOWN" to turn the function on and off.
2.
Use the "OK" key to change between settings.
3.
Use the "UP" and "DOWN" keys to change the percentage.
4.
To return a setting to default, press and hold the "OK" key
for 3 seconds. Press and hold the "CANCEL" key to save.
5.11 V tail
Used for planes that use a v tail configuration.
Setup:
1.
Use the "UP" and "DOWN" to turn the function on and off.
2.
Use the "OK" key to change between settings.
3.
Use the "UP" and "DOWN" keys to change the percentage.
4.
To return a setting to default, press and hold the "OK" key
for 3 seconds. Press and hold the "CANCEL" key to save.
E 1 euon
*E 1 euon On Chi sox

5.12 Switches assign

This function enables you to assign switches to Fly mode, Idel mode, and throttle hold.
Setup:
1. Use the "OK" key to change between settings.
2. Use the "UP" and "DOWN" keys to change switch
16
Radio
Proportional
System
Control
Ch2 sox
Chi Ch2+Ch1 Ch2
Ch2-Ch1
tai 1 On
Ch2 sox
Ch4 sox
Ch2 Ch2-Ch4
Ch4 Ch2+Ch4
itches ass
:
ign :
1 mode Swa
orma 1
Idle mode SwB
FS-i6