Helicopter Function; Pitch Curve; Swash Afr; Gyroscope - Fly Sky FS-i6 Instruction Manual

Digital
6. Helicopter Functions

6.1 Pitch Curve

This function is used for creating a curve that adjusts pitch control.
Setup:
This function uses points for adjustment across the sticks range of
movement.
The horizontal axis represents the input.
The vertical axis represents the output.
1.
Press the "OK" button to change between points.
2.
Use the "UP" and "Down" arrow keys to change a points value.
3.
Press and hold the "OK" button for 3 seconds to reset to factory
default or hold the "CANCEL key to save and exit.

6.2 Swash AFR

The [Swash AFRI function sets the relative movement between each servo controlling movement of the
swash plate controlling aileron, elevator and pitch.
Setup:
The function can be adjusted from -100 to 100 percent. The system default is set at 50 percent.
1. Press the "Ok" key to change between settings.
2. Use the "UP" and "DOWN" keys to change the settings value.
3. Press and hold the "OK" button for 3 seconds to reset to factory default or hold the "CANCEL key to
save and exit.

6.3 Gyroscope

This function is used to adjust the gyro sensitivity. If the sensitivity is too high, the helicopter will oscillate
with the tail moving from side to side; and if the sensitivity is too low, the helicopter will be sluggish and
unresponsive. When in use this function uses channel 5.
There are 2 settings within this function, on/off and percentage.
Setup:
1.
Use the "Up" and "Down" keys to turn the gyro function on or off. Then press the "OK" key to change
options.
2.
Use the "UP" and " DOWN" keys to change the value percentage.
3.
Press and hold the "OK" button for 3 seconds to reset to factory default or hold the "CANCEL key to
save and exit.

7. System

7.1 Model select

Use this function to select stored models, use the "UP" and "DOWN" keys to choose a model and press
and hold the "CANCEL" key to save and exit. The system can store up to 20 models.
18
Radio
Proportional
System
Control
P
i
tch
=
Norma
2
FS-i6