Installation; 安装 - Kenwood NX-200 Service Manual

NX-200
Voice Guide & Storage Unit (VGS-1: Option)
■ Installing the VGS-1 (Voice Guide & Storage
Unit) in the transceiver
1. Remove the bond from between the chassis and the
screw for the option board cover using a pair of twee-
zers.
2. Remove the two screws from the cover.
3. Remove the cover by inserting the tip of a pair of twee-
zers into the screw hole of the cover and prying it open.
10

INSTALLATION /

Bond
粘合剂
安装
语言指导及存储单元 (VGS-1: 选购件 )
■在手持对讲机中安装 VGS-1( 语言指导及存储单元 )
1. 用镊子除去底座与可选板盖的螺丝之间的粘合剂。
2. 卸下盖子上的两颗螺丝。
3. 将镊子的尖端插入盖子的螺丝孔将其撬开，取下盖子。