Kenwood NX-200 Service Manual page 18

NX-200
■ Forming the VOL/CH FPC, Cord ASSY and Uni-
versal connector FPC
Form the VOL/CH FPC, Cord ASSY and Universal con-
nector FPC as shown in the fi gure.
Note:
Fold indications are printed on the Cord ASSY and Uni-
versal Connector FPC.
"––––" line shows creased line on the top.
"- - - -" line shows creased line on the bottom.
■ Mounting the chassis onto the case
1. Apply the silicon grease (W05-1492-00) onto the speaker
part of the key top and around the chassis.
18
DISASSEMBLY FOR REPAIR /
VOL/CH FPC
Cord ASSY
线缆组件
TX-RX CONT
J87-0005
Cord ASSY
线缆组件
维修拆卸
■ 确定 VOL/CH FPC，线缆组件和通用连接器 FPC 的
形状
使 VOL/CH FPC，线缆组件和通用连接器 FPC 的形状如图所
示。
Universal
Connector FPC
通用连接器FPC
注意 :
线缆组件和通用连接器 FPC 上印有折叠标志。
" "线表示顶部的折线。
" "线表示底部的折线。
J87-0007
Universal Connector FPC
通用连接器FPC
■将底座安装到壳体上
1. 在键帽的扬声器部分和底座周围涂上硅脂 (W05-1492-00)。
IP67
Apply the silicon grease
(W05-1492-00) onto the speaker
part of the key top and around
the chassis.
在键帽的扬声器部分和底座周围涂上硅脂
(W05-1492-00)。