Table of Contents
Advertisement
Table A-7 I3H-8TX-2FX IOM Physical Specifications
Physical
Dimensions
Weight
Predicted hours for Mean Time Between
Failures (MTBF)
Power Requirements
The power requirements for the I-Series switch are as follows:
Table A-8 Power Requirements
Electrical
Input Power
Power Consumption
Environmental Requirements
The environmental specifications for the I-Series switch are as follows:
Table A-9 Environmental Specifications
Item
Operating Temperature
Storage Temperature
Operating Humidity
Operation Shock
IOM Port Specifications
The IOMs available for the I-Series switch have the following port configurations:
IOM Model
I3H-4FX-MM
I3H-8FX-MM
I3H-12TX
I3H-4FXM-MEM
I3H-6TX-MEM
I3H-8TX-2FX
Fiber Ports (LC)
Four 100BASE-FX (Multimode)
Eight 100BASE-FX (Multimode)
None
Four 100BASE-FX (Multimode)
None
Two 100BASE-FX (Multimode)
Specification
4.57 cm x 10.7 cm x 11.4 cm
(1.8 in. x 4.21 in. x 4.5 in.)
0.20 kg (0.45 lb)
Information about MTBF is located at
http://www.enterasys.com/support/mtbf.
Specification
24 VDC ~ 2.5 A
18 to 36 Volt DC
0.93 to 1.87 A
33.48 to 33.66 W
Specification
-40°C to 60°C (-40°F to 140°F)
-40°C < Tamb < +60°C
-40°C to +70 °C (-40 °F to 158°F)
95% relative humidity non-condensing
50 G trapezoidal shock
Copper Ports (RJ45)
None
None
Twelve RJ45 10/100BASE-TX
None
Six RJ45 10/100BASE-TX
Eight RJ45 10/100BASE-TX
Enterasys I-Series Hardware Installation Guide A-3
Power Requirements
Advertisement
Chapters
Table of Contents
