Checking The Leds; I-Series Switch Chassis Leds; Uplink Port Led Definitions - Enterasys I Series Hardware Installation Manual

Checking the LEDs

Checking the LEDs
The following sections define the behavior of the LEDs on the I-Series switch chassis and on the
IOMs. Refer to
location of the LEDs on the IOMs.

I-Series Switch Chassis LEDs

Refer to
chassis.
Figure 3-1
1 Uplink port LEDs
2 CPU LED
The uplink port LEDs on the front panel, marked 25 for the top port and 26 for the bottom port,
indicate link activity. Their status is described in
Table 3-1 Uplink Port LED Definitions
Display
Off
Blinking green
Solid green
The CPU LED indicates the state of the system, as described in
3-2 Troubleshooting
Figure 3-1 for the location of the LEDs on the chassis and to
Table 3-1, Table 3-2, and

I-Series Switch Chassis LEDs

Status
No activity.
Activity over link.
Link established.
Table 3-3 for definitions of the LEDs on the I-Series switch
3 Reset button
4 Power LEDs
Table 3-1.
Figure 3-2
Table 3-2.
for the