Avaya SAB User Manual page 63

Step trigger
To set up a step trigger:
1. Open the Edit Step dialog box.
2. Select the Edit Step trigger page.
3. Create the trigger as described above.
ExceptionFlowControlStep
An exception trigger dialog flow must always contain at least one ExceptionFlowControlStep, which must be
in a path that will be executed whenever the trigger dialog flow is run.
The ExceptionFlowControlStep is used to specify how the runtime environment should return from
the exception trigger.
To configure the step:
1. Select the appropriate Runnable Step Assignment id from the drop down list. This indicates the
step that has triggered the exception.
2. Select the instruction required. The ExceptionFlowControlStep provides two options:
retry - execute the step that generated the exception again
•
continue - execute the step after the step that generated the exception.
•
Figure 57. The ExceptionFlowControlStep
Speech Applications Builder Configurator User Guide • May 15, 2004 • page 63 of 116