Avaya SAB User Manual page 44

Name and description
To begin configuring a component step:
1. Enter a specific name in the Name field (that describes the purpose of the step).
2. Enter a brief description in the Description field.
Prompt
To define the main prompt, select the Prompts tab and do one or more of the following:
type the text of the prompt into The question to ask field
•
if you want to include variable data in the prompt, select the Folder Data tab and drag and
•
drop the appropriate variable into The question to ask field. Note that the step must be linked
to previous steps before SAB can populate the Folder Data field
if you want to specify an existing .wav file, stored in the SAB database, click on the Prompts
•
tab, browse to the file and drag and drop it into The question to ask field
if you want to turn on barge-in click on the Barge-in tab and drag and drop the BARGE-IN
•
ON command into The question to ask field.
If barge-in is set to ON in Voice Properties, this setting will take precedence over the BARGE-IN ON command
and barge-in will be enabled over the entire prompt.
Figure 34. The Edit Step dialog box
Speech Applications Builder Configurator User Guide • May 15, 2004 • page 44 of 116