Table of Contents
Advertisement
Chapter 3
Bridge Parameters
To define bridging protocols, click the
Parameters
The following parameters are displayed:
You can define or remove Bridging protocols from the manager. For more
information, refer to Avaya M-MLS Routing Manager User Interface.
18
. The Bridge Parameters window appears.
Figure 3-3. Bridge Parameters Window
Table 3-3. Bridge Parameters Window
Field Name
Protocol
Bridge Group
If Name
folder and select
Layer 2
Description
The user can define Bridging for a particular protocol,
such as NETBIOS, DEC, or AppleTalk. If a particular
protocol is not defined, or if the user is using a protocol
that is not supported by the routing manager, then the
user should define the Bridging Protocol as OTHER.
Different configurations of identical protocols are
assigned Bridge Group numbers to maintain unique
identities.
The name of the interface (VLAN). An If Name may not
be used simultaneously by multiple instances of a
protocol. An interface may not be named 'Generic'.
Avaya M-MLS Routing Manager User Guide
Bridge
Advertisement
Table of Contents
