Table of Contents
Advertisement
The following parameters are displayed:
You can modify the IP Redundancy Global Parameters. For more
information, refer to Avaya M-MLS Routing Manager User Interface.
Avaya M-MLS Routing Manager User Guide
Table 4-17. Redundancy Global Parameters
Field Name
Redundancy Status -
Enable
Redundancy State
Active
Redundancy TimeOut
Redundancy Polling
Interval
Description
The entry status:
• Enable - Enables IP Redundancy as
configured in the IP Redundancy Table
window.
• Disable - Disables the IP Redundancy
function.
When the IP Redundancy Status is enabled, the
state of the backup router may be inactive or active.
• Inactive - No special function is performed by
the secondary router except polling the main
router. While the main router is operational,
the Redundancy State remains inactive.
• Active - The backup router detected the
failure of the main router and is currently
forwarding traffic in its place. It answers ARP
requests for the main router, providing its
own MAC address. While the Redundancy
State is active, the backup router continues to
poll the main router to check for recovery.
The interval in seconds during which the main
router must signal. If the main router does not
signal within this interval, it is considered not
operational.
The polling interval for this router, in seconds. If
the interval is zero, then the router is not polled.
IP Route
47
Advertisement
Table of Contents
