Sap Interfaces - Avaya M-MLS User Manual

Chapter 5

SAP Interfaces

To display and update the SAP Interfaces, click the
select
The SAP interface is created automatically when you create a new IPX
interface; deleting the IPX interface will also delete the SAP interface.
The following parameters are displayed:
60
SAP Interfaces . The SAP Interfaces window appears.
Figure 5-4. SAP Interfaces Window
Table 5-4. SAP Interface Parameters
Field Name
Circuit No
Network No
Status - Enable
State - Active
Update Interval
Description
The IPX circuit number specific to the SAP
interface.
The IPX network from which the SAP interface
accepts and sends SAP messages.
The status of the SAP interface.
The state of the SAP interface. If the SAP status is
enabled but the IPX Interface is disabled, the IPX
SAP interface state will be inactive.
The SAP periodic update interval, in seconds.
Avaya M-MLS Routing Manager User Guide
IPX Route folder and