Rip Interfaces - Avaya M-MLS User Manual

RIP Interfaces

To display and update the RIP Interfaces, click the
select
The RIP interface is created automatically when you create a new IPX
interface; deleting the IPX interface will also delete the RIP interface.
The following parameters are displayed:
Avaya M-MLS Routing Manager User Guide
RIP Interfaces . The RIP Interfaces window appears.
Figure 5-2. RIP Interfaces Window
Table 5-2. RIP Interface Parameters
Field Name
Circuit No
Network No
Status - Enable
State - Active
Update Interval
Description
The IPX circuit number specific to the RIP interface.
The IPX network that RIP messages are accepted
and sent from.
The status of the RIP interface. If checked, the RIP
interface is enabled.
The state of the RIP interface. If the RIP status is
enabled but the IPX Interface is disabled, the IPX
RIP interface state will be inactive.
The RIP Periodic update interval, in seconds.
IPX Route
IPX Route folder and
57