Table of Contents
Advertisement
* Note:
The parameters in the IPX RIP Routing Table window are read-only.
Avaya M-MLS Routing Manager User Guide
Table 5-3. RIP Routing Table Parameters
Field Name
Next Hop Address
Protocol
Ticks to Network
Hops to Network
Next Hop Circuit No.
Age
Static Route is not allowed.
Description
IPX node address (12 hexadecimal digits) of the
next IPX router in the route to the destination
network that is described by this table entry. If the
destination network is one of the network
segments directly connected to this IPX router, this
field contains all zeroes.
The routing protocol from which knowledge of this
destination NetNumber was obtained:
• Local - The entry was learned from the
parameters of the current router.
• RIP - The entry was learned from the RIP
protocol.
An estimate of the time required for the
propagation of a packet sent along the route
described by this table entry to the destination
network. This estimate is given in ticks (there are
18.21 ticks in a second), and does not include
delays introduced by buffers used for temporary
storage of packets in routers.
Number of hops on the route to the destination
network described by this table entry.
The IPX circuit that is used to get to the next hop
router for a remote network.
Time in seconds from the last RIP update needed to
remove a service learned from RIP.
IPX Route
59
Advertisement
Table of Contents
