Avaya M-MLS User Manual page 30

Chapter 4
You can create, modify, or delete Routing Table static entries. For more
information, refer to Avaya M-MLS Routing Manager User Interface.
* Note: Only static entries in the Routing Table can be modified.
24
Table 4-3. Routing Table Parameters
Field Name
Protocol
Metric
Route Type
Route Age
Entries learned from OSPF, RIP or local cannot be modified.
Description
The protocol through which the route was learned.
The following protocols can be specified:
• Static - The route was manually configured to
this device.
• Local - The route represents a directly
attached net/subnet and corresponds to one
of the IP interfaces configured to this device.
• RIP - The entry was learned from the RIP
protocol.
• OSPF - The entry was learned from the OSPF
protocol.
Number of hops to the destination network, or the
cost of the route for OSPF routes.
The type of route, either local or remote.
The number of seconds since the route was last
updated.
Avaya M-MLS Routing Manager User Guide