Recall - AT&T Merlin Legend MLX-10D User Manual

Features

Recall

Depending on how your system is set up, you may be able to
use the Recall button to disconnect from one call and get a
new inside or outside dial tone without hanging up, or to use
certain system features, such as Transfer or Hold. Y
then make another call, using the appropriate feature, or, if
you have made a mistake in dialing, start over.
If you are able to use Recall on your system, you can use it
when you are on a call on an outside line button, or on an
inside or outside call on an SA or ICOM button. Recall works
only on certain kinds of outside lines. Ask your system
manager if Recall works for outside lines on your phone.
To Program a Recall Button
1. Label the button to be programmed as Recall.
2. Press Menu.
3. Select Ext Program [Prog].
4.
Select Start .
Press the button you labeled Recall.
5.
6. Select ListFeature [List].
7.
Select Recall [Recll].
If this feature is not displayed, use FindFeature [Find] or press
More.
Home.
Press
8.
Recall
5-82
can
OU