Table of Contents
Advertisement
3. ADJUSTMENTS
3.16
How to Set the Year/Month of Oil Change
The year and month at which the sonar oil is either filled (at installation) or replaced
must be set within the menu. Also, if the processor unit is replaced, the year and month
must be transferred to the new processor unit.
Set the year and month of oil change as follows:
1. With the MENU/ESC key pressed and held, press 1/F1, 3/F3, 5/F5 in order.
The system menu items appear on the main menu. Repeat the above procedure
to hide the system menu items.
2. Press the MENU/ESC key to open the menu.
3. Select [9 Installation Setting].
A confirmation message appears.
4. Select [OK].
5. Select [System/Maintenance].
6. Select [Set the Year/Month of Oil Change].
Note: When replacing the processor unit, the year and date shown in this menu
must be transferred to the new processor unit.
7. Select [Year].
8. Set the year of the sonar oil change.
9. Select [Quit] on the setting box.
10. Select [Month].
11. Set the month of the sonar oil change.
12. Select [Quit] on the setting box.
13. Select [Message Timing].
14. Set the message timing (unit: month).
A message, notifying the operator that oil replacement is required,
appears on-screen when the months set here has passed from the
date set in this menu. When [Message Timing] is set to "0", the noti-
fying message does not appear.
15. Select [Quit] on the setting box.
16. Press and hold the MENU/ESC key to close the menu.
17. With the MENU/ESC key pressed and held, press 1/F1, 3/F3, 5/F5 in order to hide
the system menu items.
3-20
Menu
Installation Setting
System/Maintenance
Set the Year/Month of Oil Change
Year
: 2018
Month
: 1
Message Timing
: 31
Quit
Quit
Cancel
Quit
Cancel
Quit
Cancel
Advertisement
Table of Contents
