Table of Contents
Advertisement
1. OPERATIONAL OVERVIEW
1.2.5
Other indication
The following data are displayed at the top right of the screen.
• Sonar settings: Shows the range, gain and user program number.
• External data: Shows the data received from external equipment.
• Echo volume: Shows the volume calculated from the echo region mark function.
Sonar settings
- R: Range (100 m to
5000m)
- G: Gain (0.0 to 10.0)
- P: User program
number (1 to 10)
See section 1.5 to
change the setting
value for R, G or P.
1.3
Operational Overview
1. Click
or
on the upper or lower InstantAcces bar
2. Click an icon to execute the menu function. The selected icon is displayed in cyan. The icons
that have a
at the bottom right have additional menus.
3. To deactivate a function, click the icon again. The color for the icon changes from cyan to gray.
4. To hide the user menu, click
1.4
How to Change the Viewpoint
You can change the viewpoint when no menu icons are selected.
To change the viewing angle, drag the 3D-View echo up or down.
To change the view-point origin, drag the 3D-View, Top-View* or Side-View* echo to the right
or left.
*: This function is available on the Top-View and Side-View when checking the box for [Rotate
Top-View/Side-View] in the Advanced Setting menu.
P
3
33°50.245N
119°44.237W
0.4kn 237°
0.4kn 255°
-10.0°C
VOL-1
9999.99
VOL-2
9999.99
or
on the upper or lower InstantAcces bar
5
External data
- HDG: Heading
- COG: Course over ground
- SPD: Speed
- Latitude
- Longitude
- DPTH: Depth
- C1 to C5: Current
- TEMP: Temperature
Echo volume
- VOL-1: Echo volume for echo
region mark 1
- VOL-2: Echo volume for echo
region mark 2
™
to open the user menu.
™
.
Advertisement
Table of Contents
