How To Set Up A Secondary Monitor - Furuno FSV-75 Installation Manual

3. ADJUSTMENTS
5. Adjust each setting item.
• [Ship's Length]: The length of the ship.
• [Ship's Width]: The width of the ship at its widest point.
• [TD Position 1]: Distance from transducer to bow.
• [TD Position 2]: Distance from transducer to keel. Set a positive value for star-
board installations, a negative value for port installations.
6. Press and hold the MENU/ESC key to close the menu.
3.8

How to Set Up a Secondary Monitor

When a secondary monitor is connected, use the following procedure to adjust the
display settings.
1. Press the MENU/ESC key to open the menu.
2. Select [9 Installation Setting].
A confirmation message appears.
3. Select [OK].
4. Select [1 Display Setting].
5. Select [5 Monitor Setting].
6. Select [1 2nd Monitor Setting].
3-10
TD Position 1
TD Position 2
(Negative value
for port)
Ship's Width
Menu
Installation Setting
Display Setting
1 Orientation Mode : Head Up
2 Echo Display Area : Within Range
3 Full Screen Area : 1.3R
4 TVG/SIG Monitor TRANSP : OFF
5 Monitor Setting
6 Timer Display : OFF
7 Data Box Display : ON
8 Date Display : ON
Menu
Installation Setting
Display Setting
Monitor Setting
1 2nd Monitor Setting : Sub Display
Ship's
Length
Quit
Quit