Resetting The Speakerphone With The Softkeys (When Powering Up The Voice Terminal) - Lucent Technologies Definity 8434DX User Manual

Resetting the Speakerphone with the Softkeys
(When Powering Up the Voice Terminal)
Important: You can use the Reset Speakerphone feature only if the Reset Spkr
label appears under the
When you first power up the voice terminal, the following display appears.
Begin
When you reset the speakerphone on your voice terminal, you hear a set of tones as
the speakerphone performs an acoustic test of the environment. When the tones
stop, your speakerphone has finished adjusting itself for optimal performance and is
ready for use. For more information about the Reset Speakerphone feature, see
"Reset Speakerphone" in the Voice Feature Procedures section later in this guide.
Note: If you are using an 8434DX without the
will automatically reset the built-in speakerphone when needed.
To reset the speakerphone
(when the voice terminal
is first powered up)
Speaker button.
PLEASE RESET SPKR.
1
Press the softkey below Begin to reset the
speakerphone
(Press the softkey below Cancel if you do not want to
reset the speakerphone at this time. However, note
that the red light next to
flutter.)
If you press the softkey below Begin, the display
shows the following timed screen:
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
You will hear a set of rising tones as the
speakerphone adjusts itself to the surrounding
acoustical environment. These tones are
automatic. No user response is required.
Cancel
button, the voice terminal
Shift
will continue to
Speaker
15