Speakerphone - Lucent Technologies Definity 8434DX User Manual

To mute the microphone
associated with the
handset so the other
party cannot hear you
To activate the speaker
while using the handset
To end a call (while
handset is on-hook
and only the speaker is
active)

Speakerphone

Note: If you are uncertain whether your voice terminal is set for the Speaker
(listen-only) feature or the Speakerphone (listen and talk) feature, check with your
system manager.
Use the following procedures if your voice terminal is set for the Speakerphone
(speak and listen) feature.
If the Reset Spkr label appears under the
terminal, you can use the Reset Speakerphone feature. For directions on using the
Reset Speakerphone feature, see "Reset Speakerphone" in this section.
To place/answer a call
without lifting the
handset, or to use the
speakerphone with
any feature
1
Press Mute
Red light next to
party cannot hear you
2
Press again to resume talking to the other party
Mute
through handset
Red light next to
party can hear you again
1
Press Speaker
Red light next to
to Mute go on steadily
The speaker is active, and the handset is turned
off
1
Press Speaker
Red light next to
to Mute go off
Speaker
1
Press
Speaker
Red light next to
2
Place or answer a call, or access the selected feature
3
Adjust speakerphone volume if necessary
To raise the volume, press the right half of the
Volume control button labeled
to lower the volume, press the left half of the
Volume control button labeled
goes on and the other
Mute
goes off and the other
Mute
and the red light next
Speaker
and the red light next
Speaker
button on your 8434DX voice
Speaker goes on steadily
;
36