Normal (Exit); Time/Date - Lucent Technologies Definity 8434DX User Manual

To see a coworker's
messages (can be during
call with the coworker)
Note: You must first
be designated as a
systemwide message
retriever by your
system manager.
To return a call for the
coworker to the displayed
extension (while on call
with the coworker)

Normal (Exit)

To return to the normal
display after using any
display feature

Time/Date

To see the date and time
1
Select an idle call appearance button, or put the
coworker on hold and select an idle call appearance
button
2
Press
Covr Msg Retrieve
3
Dial the coworker's extension
4
Press Next Message
(and then for each following message)
5
Press the call appearance button of the person on hold
to give them their messages, if appropriate
1
Press Transfer
Coworker is put on hold
2
Press
Call Disp
shown
3
Press
Transfer
Coworker is connected to the call
1
Press Exit
Display will show call information for the active
call appearance
1
Press and then press the softkey below
Menu
TmDay
or Press
Date/Time
Display returns to Normal Mode after a few
seconds
to see the first message
while any part of the message is
[dial tone]
41