Speaker - Lucent Technologies Definity 8434DX User Manual

Speaker

Note: Your voice terminal is set for either the Speaker (listen-only) or the
Speakerphone (listen and talk) function. Check with your system manager to see if
you can use either of these two features.
In order for the other party to hear you, you must speak through the handset.
Use the following procedures if your voice terminal is set for the Speaker
(listen-only) feature.
To place a call without
lifting the handset, or to
use speaker with any
listening-only feature
activity (such as,
monitoring a call on
which you have been put
on hold or for group
listening)
To turn off the speaker
and return to the handset
1
Press
Speaker
Red light next to
red light next to
2
Place the call or access the selected feature
3
Adjust speaker volume if necessary
To raise the volume, press the right half of the
Speaker Volume control button labeled
to lower the volume, press the left half of the
Speaker Volume control button labeled
The display shows:
SPEAKER
(There are eight possible volume settings. On the
display, one arrow is the lowest setting, and
eight arrows is the highest setting.)
1
Pick up the handset
Red light next to
to go off
Mute
Speaker goes off
goes on;
Speaker
goes on
Mute
L > > > >
and the red light next
Speaker
;
H
35