Send All Calls - Lucent Technologies Definity 8434DX User Manual

Send All Calls

To send all incoming calls
(except priority, intercom,
and personal central office
calls) immediately to an
assigned extension,
AUDIX, or message
center for coverage
To send an assigned
group of extensions
(except priority, intercom,
and personal central office
calls) immediately to an
assigned extension,
AUDIX, or message
center for coverage
To cancel Send All Calls
or SAC Group
The display shows:
RINGER
(There are eight possible volume settings.
On the display, one arrow is the lowest setting, and
eight arrows is the highest setting.)
One full ring cycle will sound to demonstrate the
new volume.
1
While on-hook or off-hook, press
or Pick up the handset and dial the Send All Calls
access code __________
Note: You may hear a half ring as each call is sent
to coverage if you have a DEFINITY Generic 2 or a
System 85 R2V4.
1
While on-hook or off-hook, press
1
While on-hook, press
again
or Pick up the handset and dial the Send All Calls
cancel code __________
Your calls ring at your own voice terminal again
L > > > > H
Send All Calls
[confirmation tone]
SAC Group
[confirmation tone]
or
Send All Calls SAC Group
[confirmation tone]
34