Adjusting Height Of Chest Belt - Invacare Dragon Vertic User Manual

Invacare® Dragon Vertic
1. Loosen screw (1).
2. Adjust armrest to required position.
3. Re-tighten screw.
4. Repeat this procedure for the second armrest.

5.8 Adjusting height of chest belt

WARNING!
Risk of falling out of wheelchair, if chest belt
comes undone
– Make sure that the hook-and-loop straps on
the chest belt cover each other completely.
– Always secure the chest belt using the
additional belt (with snap lock) before the chair
is brought into an upright position.
What should be observed when adjusting the height
of the chest belt?
The height of the chest belt depends on the stability
of the upper part of the body. The lesser the
stability, the higher the belt adjustment.
• 5 mm Allen key
38
1. Loosen screws (1).
2. Adjust height of belt.
3. Re-tighten screws.
1451170-L