Labels On Product - Invacare Dragon Vertic User Manual

CAUTION!
Risk of injury
The chest belt lock can lose strength due to
soiling or wear.
– The belt lock hook strap must not be soiled
or clogged with fluff, fabric residue or similar
foreign bodies. It must be in a clean,
undamaged condition.
– The belt lock loop strap must not be frayed or
otherwise damaged or soiled.
– The seams which fix the hook-and-loop straps
to the belt must be in perfect undamaged
condition. The hook-and-loop straps may not
loosen themselves from their substrate.
– When locking the belt, the hook strap and loop
strap must completely overlap each other. The
strength of the lock is considerably decreased
if the hook strap and loop strap only partially
overlap.
– To check the functionality of the belt, the user
should lean forwards and exert pressure on the
belt when the verticalizer is lowered and the
belt is fastened. The belt lock must not loosen
or release when this is done. In doing so, the
user must be safeguarded by an attendant so
that he cannot fall forwards out of the power
wheelchair if the lock should release.
1451170-L
Risk of damage to wheelchair
If the seat depth is not adjusted properly, there
is risk of the verticalizer being destroyed.
– The lower and upper perforated rails of the
parallelogram must be adjusted analog to each
other. Otherwise the verticalizer is destroyed
when operated due to the modified geometry.

2.8 Labels on product

Safety
19