Adjusting And Removing The Tray; Swivelling Tray Upward - Invacare Dragon Vertic User Manual

Hide thumbs Also See for Dragon Vertic:
Table of Contents

Advertisement

Invacare® Dragon Vertic
4.
Loosen screw on limit switch (1).
5. Slide limit switch upward or downward.
Upward = actuator is shut down earlier when
standing up, user is erected to a lesser degree.
Downward = actuator is shut down later when
standing up, user is erected to a greater degree.
6. Re-tighten screw.
7.
Re-position rubber cover and press carefully into the
groove.
42

5.12 Adjusting and removing the tray

CAUTION!
Risk of injury or material damage if a mobility
device which is fitted with a tray is transported
in a vehicle
– If a tray is fitted, always remove it before
transporting the mobility device.

5.12.1 Swivelling tray upward

CAUTION!
Risk of injury! When the tray is raised it does
not lock in place in this position
– Do not tilt the tray up and leave it leaning in
this position.
– Never attempt to drive with the tray tilted up.
– Always lower the tray in a controlled manner.
1451170-L

Advertisement

Table of Contents
loading

Table of Contents