Cycle Parts
RS 50
REMOVING THE REAR MUDGUARD
Read through the section PRECAUTIONS AND
GENERAL INFORMATION.
Place the vehicle on the stand.
WARNING
Allow the engine and the exhaust terminal to cool
down completely.
Remove the two screws (1).
1
Tightening torque for screws (1):
5 Nm (0.5 kgm) [3.7 ft-lb]
Remove rear mudguard (2).
2
1
REMOVING THE PASSENGER FOOTREST
SUPPORT
Read through the section PRECAUTIONS AND
GENERAL INFORMATION.
Place the vehicle on the stand.
CAUTION
Allow the engine and the exhaust terminal to cool
down completely.
Loosen and remove screw (3) (operation to be per-
formed only for the passenger footrest on the right
side).
Tightening torque for screw (3):
12 Nm (1.2 kgm) [8.8 ft-lb]
3
7-24
chap. 7
Release 00
2000-11