Cycle Parts
REMOVING THE LOWER FAIRING
Read through the section PRECAUTIONS AND
GENERAL INFORMATION.
WARNING
When handling plastic and painted parts, take
care not to score or damage them.
Place the vehicle on the rear stand
WARNING
Allow the engine and the exhaust terminal to cool
down completely.
Loosen and remove the seven screws (1).
Tightening torque for screws (1):
3 Nm (0.3 kgm) [2.2 ft-lb]
Remove inner fairings (2).
WARNING
Also remove the other fairing.
Loosen and remove the eight screws (3).
Tightening torque for screws (3):
3 Nm (0.3 kgm) [2.2 ft-lb]
Remove tip (4).
Loosen and remove the three screws (5).
Tightening torque for screws (5):
3 Nm (0.3 kgm) [2.2 ft-lb]
Lower the side stand.
Remove left-hand side panel extension (6).
7-20
.
Release 00
2000-11
1
2
1
3
5
chap. 7
RS 50
1
1
3
4
3
5
6