Pre-Ride Checklist; Usage - Razor E300 HD Owner's Manual

PRE-RIDE CHECKLIST

Brake
Check the brake for proper function. When you squeeze the
brake lever, the brake should provide positive braking action.
Make sure brake is not rubbing when the lever is released.
When you apply the brake with the throttle on/engaged, the
brake cut-off switch should cut power to the motor.
Wheels
Periodically inspect the wheels for excessive wear.
Tires
Periodically inspect the tire for excess wear and replace as
needed. Regularly check the tire pressure and inflate
as needed.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken
frames are rare, it is possible for an aggressive rider to run into
a curb or object, and wreck and bend or break a frame. Get in
the habit of inspecting your scooter on a regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts, cables,
fasteners, etc., to ensure they are secure and assembled
correctly. There should not be any unusual rattles or sounds
from loose parts or broken components. If the product is
damaged, do not ride. Reference "Safety Warnings" on
pages 1 and 2 of this manual.

USAGE

How to Operate
Do not activate the twist-grip throttle unless you are on the electric scooter and in a safe, outdoor
environment suitable for riding.
How to Ride
Once you have charged the battery (see page 5 for charging information):
1. Turn power switch "ON"; put kickstand up and place both hands on the handlebars.
2. Place one foot on deck plate and with the other foot, push (kick start) scooter (A), while twisting throttle (B).
Place other foot on deck plate once motor has engaged.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
A
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always
wear athletic shoes (lace-up shoes with rubber soles) and keep
shoelaces tied and out of the way of the wheels, motor and drive
system. NEVER RIDE BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies necessarily
provide coverage for product use. Check with your insurance
company for information regarding insurance.
Storage
Prolonged exposure to UV rays, rain and the elements may
damage the enclosure materials, store indoors when not in use.
B
6
Note: Electric scooter must be
moving at least 3 mph (5 km/h)
while engaging throttle to
engage motor.