Pre-Ride Checklist - Razor 13013211 Owner's Manual

PRE-RIDE CHECKLIST

Loose Parts
Check and secure all fasteners before every ride. Make sure the
collar clamp, quick-release lever, anti-rattle knob, and handlebar
spring buttons are locked properly in place before riding.
Replacement Parts
Replace worn or broken parts immediately.
Safety Gear
Always wear proper protective equipment, such as an approved
safety helmet, elbow pads and kneepads. Always wear shoes
(lace-up with rubber soles) and keep shoelaces tied and out of
the way of the wheels. Never ride barefooted or in sandals.
USAGE
How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer with both hands on the handlebars.
For enhanced cornering, lean slightly into the direction of the turn. For controlled stops, apply the brake by stepping
on the rear brake. Razor recommends that you practice applying the brake at various speeds and in an open area
free from obstructions before riding your scooter around others.
Be Careful!
You will see people on TV and maybe even people you know doing
tricks and stunts. These are people who have been practicing on
scooters for a very long time. Don't try something until you are
ready. Avoid steep inclines and don't ride too fast — you can lose
control and fall. Skateboard parks are not designed for scooters.
Never ride in traffic or on the street and watch your surroundings
for pedestrians, bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.