Pre-Ride Checklist - Usage - Razor POWER CORE E100 Series Owner's Manual

PRE-RIDE CHECKLIST
Brake
Check the brake for proper function. When you squeeze
the brake lever, the brake should provide positive braking
action. When you apply the brake with the throttle on/
engaged, the brake cut-off switch should cut power to the
motor.
Wheels
Periodically inspect the wheels for excessive wear.
Tire
Periodically inspect the tire for excess wear and replace
as needed. Regularly check the tire pressure and inflate
as needed.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken
frames are rare, it is possible for an aggressive rider to
run into a curb or object and wreck and bend or break
a frame. Get in the habit of inspecting your scooter on a
regular basis.
Hardware/Loose Parts
Before every ride, check all parts, such as nuts, bolts, cables,
fasteners, etc., to ensure they are secure and assembled
correctly. There should not be any unusual rattles or sounds
from loose parts or broken components. If the product is
damaged, do not ride. Reference "Safety Warnings" on page
1 of this manual.
USAGE
Starting the Scooter
Turn power "ON"; put kickstand up and place both hands on the handlebars.
Place one foot on deck plate and with the other foot, push (kick start) scooter while twisting throttle (A). Place other
foot on deck plate once motor has engaged.
A
Stopping the Scooter
To stop, release the throttle (A) and apply the brake, by squeezing brake lever (B), until the product
comes to a complete stop.
A
B
Safety Gear
Always wear proper protective gear, such as an approved
safety helmet. Elbow pads and kneepads are recommended.
Always wear athletic shoes (lace-up shoes with rubber
soles) and keep shoelaces tied and out of the way of the
wheels, motor and drive system. NEVER RIDE BAREFOOTED
OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Insurance
Do not assume that your existing insurance policies
necessarily provide coverage for scooter use. Check with
your insurance company for information regarding insurance.
Storage
Prolonged exposure to UV rays, rain and the elements may
damage the enclosure materials, store indoors when not in use.
6
Note: Electric scooter must be
moving at least 3 mph (5 km/h)
while engaging throttle to
engage motor.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
hand brake is applied.
Note: Motor will re-engage,
(without having to kick start),
if brake is released and throttle
is engaged before scooter has
slowed down to under 3 mph
(5 km/h).