Ricoh IM 2702 User Manual page 60

2. Copy
• Original Direction: Specify the orientation to place the originals.
• Original Setting: Specify the condition of the originals to copy (1 sided/2 sided
• Print Side Setting: Select the finish from [Open to Right/Left] or [Open to Top].
3. Press [OK].
3. Place the original.
See "Placing an Original on the Scanner", User Guide (Full Version).
4. Press [Start].
• When placing the originals on the exposure glass, press [Finish Scn] after scanning all of the
originals if necessary according to the setting contents and number of originals.
• You cannot perform Duplex Copy onto the following paper types:
• Label paper (adhesive labels)
• Transparency
• Envelopes
• Thin paper
• Thick paper
• You can change the setting contents of the two-sided copy key on the Copy screen.
• See "General Features (Copier Settings)", User Guide (Full Version).
• Use the [Series] function to copy the front and back sides of a two-sided original onto one side of a
sheet page by page.
• See "Copying Two-sided Original", User Guide (Full Version).
58
(Page Opening Direction)).