Ricoh IM 2702 User Manual page 148

7. Adding Paper and Toner
3. Select the tray to which you loaded the paper: [Tray Paper Size: Tray 1] to [Tray Paper
Size: Tray 3] or [Printer Bypass Paper Size].
4. Select the size of the loaded paper.
5. Press [OK].
6. After completing the configuration, press [Home](
• To use paper that can be detected automatically after using paper that cannot be detected
automatically, restore the setting of Auto Detect. To restore the setting of Auto Detect, load the
paper again, operate steps 1 to 3, select [Auto Detect], and then press [OK].
146
EBW696
).