Ricoh IM 2702 User Manual page 13

• In this mode, you can scan documents, send faxes, receive faxes into memory, change the
machine settings on the control panel, and perform other operations that do not require
printing.
Low Power Mode
If you do not use the machine for a certain period after an operation, the display will turn off and
the machine goes into Low Power mode. The machine uses less electricity in Low Power mode.
• You can change the amount of time that the machine waits before switching to Low Power
mode under [Low Power Mode Timer].
See "Timer Settings", User Guide (Full Version).
• You can change the machine's settings to enter Low Power mode when you press the [Energy
Save] ( ) key.
See "Timer Settings", User Guide (Full Version).
• The machine recovers from Low Power mode when you perform one of the following:
• Lift the ADF.
• Place an original in the ADF.
• Touch the display of the control panel.
• Open the front or right cover.
Sleep Mode
In this mode, the display of the control panel turns off and the main power indicator blinks slowly.
Power consumption is minimized. When you do not operate the machine for a specified period of
time or press [Energy Save] (
• You can specify the amount of time that the machine waits before entering Sleep mode under
[Sleep Mode Timer].
See "Timer Settings", User Guide (Full Version).
• The machine recovers from Sleep mode when you perform one of the following:
• Lift the ADF.
• Place an original in the ADF.
• Touch the display of the control panel.
• Open the front or right cover.
• The energy saving functions are disabled when an error occurs or while an operation is in
progress.
), the machine enters Sleep mode.
Turning On and Off the Power
11