Table of Contents
Advertisement
2. R GAIN adjustment
Select R signal by pushing down the TEST OUT switch (side panel) from the RGB position towards
the SEL position.
Adj. point:
1RV1 (R3)/NR-65 board
Specification:
The same as for G GAIN adjustment.
3. B GAIN adjustment
Select B signal by pushing down the TEST OUT switch (side panel) from the RGB position towards
the SEL position.
1RV3 (B3)/NR-65 board
Adj. point:
Specification:
The same as for G GAIN adjustment.
Setting after adjustment
. TEST OUT switch (side panel) → ENC
. S3-4/AT-128 board → OFF
BVP-9500WS/9500WSP MM
3-2. Video Adjustment
NR-65 BOARD
RV3 (B3)
RV2 (G3)
RV1 (R3)
3-17 (E)
Advertisement
Table of Contents
