Table of Contents
Advertisement
1-5. Replacing External Connectors
4. Remove the four hexagon socket screws by an Allen wrench (width across flats: 2.5 mm), and
separate the chassis assembly and base chassis assembly.
n
Chassis assembly and base chassis assembly are connected with harnesses. Be careful not to damage
harnesses.
Hexagon socket
screws
5. Remove the two screws and pull out the CN-1928 board.
6. Disconnect the harness from the CN2 connector on the CN-1928 board.
OHB connector
7. Install a new CN-1928 board in the reverse order of removal.
1-20 (E)
Hexagon socket screws
CN-1928 board
B2 x 6
CN2
Chassis assembly
Base chassis assembly
BVP-9500WS/9500WSP MM
Advertisement
Table of Contents
