Table of Contents
Advertisement
2-2. Details of Maintenance Menu
2-2-2. System Setup Page
* System Setup *
Camera No.
: Undefined
Filter Local: Enable
Gain SW Low : 0dB
Gain SW Mid : 6dB
Gain SW High:12dB
Color Bar
: OFF
Monitor Char: ON
Crop
: OFF
Field Rate
: 180
Digital out : ON
Item
Setting
Camera No
Undefined, 1 to 96, A to Z Sets the camera number.
Filter Local
Enable, Disable
Gain SW Low
_3, 0, 3, 6, 9, 12
Gain SW Mid
Gain SW High
Color Bar
ON/OFF
Monitor Char
ON/OFF
Crop
ON/OFF
Field Rate
60/180 (for BVP-9500WS) Sets the field rate.
50/150 (for BVP-9500WSP) 60/50: x1 speed
Digital Out
ON/OFF
a)
Be sure to set S3-4 switch on the AT-128 board to ON before setting the field rate to 180/150 during adjustment.
After adjustment, be sure to reset S3-4 switch to OFF.
2-4 (E)
(Display is initial values.)
Description
Sets whether to enable or disable use of the FILTER LOCAL button.
Enable: The ND, CC filter can be selected in this unit.
Disable: The ND, CC filter cannot be selected in this unit.
Sets the gain value corresponding to "L" of the GAIN switch.
Sets the gain value corresponding to "M" of the GAIN switch.
Sets the gain value corresponding to "H" of the GAIN switch.
Sets ON/OFF the color bar output.
Sets whether to display characters in the video signal to be output at
the TEST OUT and REMOTE connectors.
ON: Displays characters in the video signal.
OFF: No characters are displayed in the video signal.
Sets the aspect ratio of the screen.
ON : 4 : 3
OFF : 16 : 9
a)
180/150: x3 speed
Sets ON/OFF the digital signal output to CA.
When CA-950/950P is connected, turn this item to ON automatically.
BVP-9500WS/9500WSP MM
Advertisement
Table of Contents
