Notes On Adjustment; Connection - Sony BVP-9500WS Maintenance Manual

3-1. Preparation

3-1-2. Notes on adjustment

. All measuring equipment should be calibrated.
. All the adjustment of peripheral equipment (CCU, MSU) should be completed.
. As for initial settings before beginning adjustment, refer to section 3-1-4.
. Be sure to power off before disconnecting boards.
. Before adjustment, allow for more than 10 minutes warm-up time.
. Use a plastic (or ceramic) core driver to adjust 1LV, 1FL, 1T, 1CV and so on.

3-1-3. Connection

2" VF(BVF-20W/20WCE)
1.35" COLOR VF(BVF-C10W)
1.5" VF(BVF-10/10CE)
ENG/EFP LENS
COLOR VIDEO CAMERA
BVP-9500WS/9500WSP
*1: Represented as "CCU" simply for convenience in wirting in this section.
*2: When CA-950/950P and CCU-900/900P are used.
*3: When CA-570/570P, CA-550/550P and CCU-550/550P, CCU-700/700P/700A/700AP are used respectively.
3-2 (E)
ELECTRONIC
VIEWFINDER
BVF-55/55CE
CAMERA ADAPTOR
CA-950/950P
CA-570/570P
CA-550/550P
OPTICAL FIBER CABLE (*2)
FC2–PD250/PD50
TRIAX CABLE (*3)
CAMERA CONTROL UNIT
CCU-900/900P
CCU-700/700P/700A/700AP (*1)
CCU-550/550P
CCA-5 CABLE
MASTER SETUP UNIT MASTER SETUP UNIT MASTER SETUP UNIT
MSU-700A/750 MSU-700 MSU-700
AC ADAPTOR
AC–550/550CE
BVP-9500WS/9500WSP MM