Table of Contents
Advertisement
PR-248 board
The Line 1 digital signal sent from the DA-143 board is processed as follows in this board.
. Various detail corrections
. Linear matrix correction
. Knee correction
. Knee saturation correction
. Pedestal control
. Black gamma correction
. Gamma correction
. White clip
. Black clip
. 16:9/4:3 processing
. DA conversion
Digital signals are processed as 10-bit RGB digital signals, and output to the camera adaptor via the CA-
1787 board. The analog signals converted in the DA circuit are sent to the EN-141 board.
This board outputs the following signals.
. White shading correction signal
. VF detail signal
. Various timing pulses
PR-249 board
The Line 2/3 digital signals sent from the DA-143 board are input to the PR-249 board via the PR-248
board. The PR-249 board performs the following processings for the Line 2/3 digital signals.
. Various detail correction
. Linear matrix correction
. Knee correction
. Knee saturation correction
. Pedestal control
. Black gamma correction
. Gamma correction
. White clip
. Black clip
. 16:9/4:3 processing
. Digital signal parallel/serial conversion
Digital signals of each line are processed as D1 format serial digital signals from 10-bit RGB digital
signals, and output to the camera adaptor via the CA-1787 board.
DA-143 board
The DA-143 board processes digital shading signals sent from the PR-248 board as follows at x1 and x3
speeds.
Shading waveform when x x x x x 1 speed:
Digital signals input to the DA-143 board are DA-converted and output to the VA-200 board.
Shading waveform when x x x x x 3 speed :
Digital signals input to the DA-143 board are x1 speed signals. They are therefore converted from
x1 speed to x3 speed in the memory circuit. Signals converted to x3 speed are DA-converted and
output to the VA-200 board.
BVP-9500WS/9500WSP MM
1-1. Circuit Description
1-3 (E)
Advertisement
Table of Contents
