Table of Contents
Advertisement
2-2. Details of Maintenance Menu
2-2-1. Description of Maintenance Menu Display
* Maintenance Menu *
System Setup
Reference Store
Lens File Store
OHB File Store
Auto Iris Setup
Super Motion Setup
OHB Trimming
2000–XX–YY Z. ZZ
Menu sel –> enter
Menu item
Description
System Setup
This item contains the camera system setting items such as field rate, gain value, aspect
ratio and so on.
Reference Store
Use this item to register the reference file and reset the value to the factory setting state.
Lens File Store
Use this item to register the lens file, reset the value to the factory setting state and switch
the registration lens.
OHB File Store
Use this item to register the OHB file, reset the value to the factory setting state and
perform the shading adjustment.
Auto Iris Setup
Use this item to set the reference level and APL (average level) ratio for auto iris.
Super Motion Setup
Use this item to output the VBS signal and monitor output signal under the operation of
super motion.
n
This item is only displayed when the Field Rate of the System Setup page is set to 180/
150. (Refer to Section 2-2-2.)
OHB Trimming
Use this item to register the OHB trimming file and perform the CCD V substrate voltage
adjustment.
n
To avoid incorrect operation, this item is not displayed at factory setting state.
To display this item because of performing adjustment, refer to "Section 2-1 Entering the
OHB Trimming Page".
After adjustment, be sure to reset the switch to the factory setting state (not to be
displayed state).
BVP-9500WS/9500WSP MM
UC–NTSC
2-2. Details of Maintenance Menu
2-3 (E)
Advertisement
Table of Contents
