Basic Call Operation; Answering Calls; To Answer An Incoming Call; To Reject An Incoming Call - NEC DT820 Series User Manual

To a ns we r an in co m in g ca ll
•
•
•
•
To r e j ec t a n i nc om ing c al l
•
To pla c e a n e x t ernal ca l l
1
6 -54
B A S I C P H O N E O P E R AT I O N

Basic Call Operation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B A S I C C A L L O P E R A T I O N
A N S W E R I N G C A L L S
Using the handset:
Lift the telephone handset.
Using the speaker:
Press the Speaker key.
Using a headset:
Press the Answer key.
If you are in the Personal Directory, Call History or Menu screens:
• DT700 and DT730G Phones: Press the Line Key to view the caller information,
then use one of the methods listed above to answer the call.
• DT820 Phones: Press the Line Key to answer the call.
If you are changing any settings on your phone or adding a Personal Directory
Note:
or Speed Dial entry, your changes will be discarded if you press the Line Key.
Press the Reject softkey.
The call will be routed in accordance with your defined forwarding conditions.
I N C O M I N G C A L L R I N G I N G T O N E S
Different ring tones can be used to distinguish between internal, external, and auto
answer (intercom-call) calls. The cadences of the ring tones are established through
configuration parameters. For more information about the incoming call ringing tones
for your system, contact your system administrator.
Soft Ring is only valid for SIP@Net platforms. Contact your system
Note:
administrator to determine if Soft Ring is available on your system.
P L A C I N G C A L L S
E X T E R N A L C A L L S
Calls made to numbers that are outside of your system usually require an outside line
access code.
Lift the handset, press the Speaker key, or press the NewCall softkey to receive dial
tone.
DT820 Phone User Guide