Record Key; To Stop The Recording A Call; Call Recording Indications - NEC DT820 Series User Manual

To r e c ord y our cu rre nt c al l
•
To s top the re co rdin g a ca l l
•
Table 8.2
8 -112
M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
Using Enhanced Programmable Keys
You can then press the Barge or Record soft key to barge on the call or start a
recording of the call. Press Exit to exit this screen without starting a Barge session or
recording of the call.
R E C O R D K E Y
Press the Record key.
A recording of your current call starts.
Press the Record key.
The call recording will stop.
C A L L R E C O R D I N G I N D I C A T I O N
If call recording indication is enabled for your account, the phone indicates call
recording status.
If call recording indication is enabled, a call recording icon
control home screen, and through the LED on the Record key for phones with a Desi-
less screen.

Call recording indications

Record Key

Event
On Demand recording Steady Red
On Demand recording Off
- On Hold (local or
remote hold)
Auto Recording Steady Red
No recording Off
Call terminated/
recording terminated
Call recording Off
indication is not
enabled
Icon (Call
Control and
Desi-less
LED
Secondary
Screen)
None
None
None
is shown in the call
Description
Indicates that the call is being
recorded by On Demand Recording.
When the recording is stopped, the
indication is also stopped.
When the call is resumed, call
recording indication is displayed
again.
Indicates that the call is being
recorded by Auto Recording.
Indicates that no call is being
recorded.
If the call you were recording is
ended, the call recording
automatically stops.
No call recording indication is shown
on the phone, even when there is a
call recording.
DT820 Phone User Guide