NEC DT820 Series User Manual page 101

DT820 Phone User Guide
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
Fewer than 24 characters may be displayed depending upon the contents of
Note:
the this field since a proportional font is used to display the field.
b
Press Enter on the cursor pad or the OK softkey.
b.
2
Number
To delete the entire number entry, press the Delete softkey.
a.
Or
To edit the entry, use the left cursor key on the cursor pad to backspace, and then
press the Delete softkey to delete the number that is before the cursor. Use the
telephone keypad to edit the number.
Up to 24 characters may be entered for the number. Only digits, "*" and "#" may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
Fewer than 24 characters may be displayed depending upon the contents of
Note:
the this field since a proportional font is used to display the field.
b
Press Enter on the cursor pad or the OK softkey.
b.
3
Speed Dial
To delete the speed dial, press the Delete softkey.
a.
Or
To edit the speed dial, use the left cursor key on the cursor pad to backspace, and
then press the Delete softkey to delete the number that is before the cursor. Use the
telephone keypad to edit the number.
The number of available Sped Dial Keys and their associated numbers depend on
your model of phone. For more information on the valid Speed Dial Keys for the
specific phone models, see "Speed Dial Key Numbering" in the user guide for your
phone.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
b
Press Enter on the cursor pad or the OK softkey.
b.
4
Monitor
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
Select the monitor settings for this entry.
a.
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
Valid options for monitoring are:
1
• None - Do not monitor presence state changes for this Speed Dial Key
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
7 -81