To Restart Your Phone; To View The Phone Settings; To View The Firmware Information For Your Phone; To View The Ip Address Of Your Phone - NEC DT820 Series User Manual

For univerge 3c communications
Table of Contents

Advertisement

To r e star t your phone
1
2
3
To v iew the pho n e settings
1
2
3
4
To v i ew the fi r m w ar e in formation for your p h o n e
1
2
3
4
5
To v iew the I P addr ess of your p hone
1
DT820 Phone User Guide
Any devices connected to the phone's PC port will momentarily disconnect
Note:
from the network when the phone is rebooted.
Press the Menu key.
5
Select
Reboot Phone.
b
Press the OK softkey or
You will not have a dial tone on the phone or be able to make calls until the phone
restarts and re-registers on the network.
If you cannot
Note:
restart
and the network for ten seconds, then reconnect the telephone to your
network and power to perform a
V I E W I N G P H O N E S E T T I N G S
If you are having problems with your phone, you may want to view the hardware
version, firmware version, or network information for your phone.
This menu item may not be available on your phone, depending on the configuration
of your phone. Contact your system administrator for more information.
You cannot change these settings on your phone. To change any of these
Note:
settings, contact your system administrator.
Press the Menu key.
6
Select
Status.
1
Select
Terminal Information to view the hardware and firmware information for your
2
phone, or select
Network Information to view the network information for your
3
phone, or select
SIP Information to view the settings for your phone and SIP account
on the network.
Use the cursor pad or the
settings.
Press the Menu key.
6
Select
Status.
1
Select
Terminal Information.
Use the cursor pad or Up/Down softkeys to scroll to the Firmware Version screen.
Press the Exit softkey to return to the Status menu.
You cannot change these settings on your phone. To change any of these
Note:
settings, contact your system administrator.
If you need to upgrade to the latest firmware version available for your phone on your
network, restart your phone.
If you are troubleshooting problems with your phone, you may need to know the IP
Address of your phone.
Press the Menu key.
B A S I C S E T T I N G S / C O N F I G U R AT I O N
Basic Setup with the Menus and Cursor Pad
Enter key on the cursor pad to restart the phone.
the phone using the Menus, unplug the phone from power
.
restart
Up and
Down softkeys to scroll through the phone
4 -43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dt820 ity-6dDt820 ity-8ldxDt820c ity-8lcgx

Table of Contents